|
Contains 12 Pegs & 12 Clips
Enjoy the easy of screwing a Peggy Peg in with a cordless drill. Be assured by its incredible holding power and secure clip. It is not necessary to fully screw a Peggy Peg in. Providing the thread is below the ground level and hook on. With an ordinary peg it is sometime necessary to dovetail them, otherwise they just pull out. With a Peggy Peg the load can be applied vertically as the holding power is so much greater. Always ensure that the clip is attached as close to the ground as possible. If the peg hits a sone when using an Anchor Plate or Uni-Plate simply smap on one of the clips. When the peg is screwed back in, the clip will jam on to the plate and hold it down.
|